RackLink have a growing range of 19″ Rack Mount Circuit Breaker Distribution Boards suitable for hard-wired distribution.
These units allow for sub-board type distribution to be installed inside a 19″ Rack Enclosure, saving the cost and frustration of finding space for a wall-mount distribution board.
This means that your distribution board can be co-located with the equipment in the Rack, making identification of circuits and problem solving easy.
Our 3U Rack Enclosure Distribution Panel has a full length DIN rail, and either a 12-pole half-width window, or a 24-pole full-width window.
The extraordinary versatility of these panels means that they can also be used for a variety of DIN-mount applications.
Contact us if you have specific site requirements, as we may be able to build a custom solution for you.
| Code | Desc | Mounting | Length | Colour |
|---|---|---|---|---|
| DBB312E | Distribution Board: 3RU – 12pole, with earth stud, Black Ripple | 3RU | 12pole | Black |
| DBG312E | Distribution Board: 3RU – 12pole, with earth stud, Grey | 3RU | 12pole | Grey |
| DBR312E | Distribution Board: 3RU – 12pole, with earth stud, Red | 3RU | 12pole | Red |
| DBB324E | Distribution Board: 3RU – 24pole, with earth stud, Black Ripple | 3RU | 24pole | Black |
| DBG324E | Distribution Board: 3RU – 24pole, with earth stud, Grey | 3RU | 24pole | Grey |
| DBR324E | Distribution Board: 3RU – 24pole, with earth stud, Red | 3RU | 24pole | Red |
| DBB424E | Distribution Board: 4RU – 24pole, with earth stud, Black Ripple | 4RU | 24pole | Black |
| DBG424E | Distribution Board: 4RU – 24pole, with earth stud, Grey | 4RU | 24pole | Grey |
Please note: These are bare units only, supplied with din rail fitted, and a kit made up of pole fillers, cable protection grommets, and mounting hardware.
Circuit Breakers & Brass/comb Busbars and insulated Comb Busbar connectors are an optional extra.
All units include a rear cable management area.
3RU Distribution Board Datasheet
